New processing example of High Manganese steel plate（Hadfield steel） 高錳鋼加工實例

Good morning!
Today let’s update the processing example of the High Manganese steel.
We could also provide the customize processing and cutting service.
Please feel free to contact us for more information.

早安! 今天來跟大家更新高錳鋼的加工案例 根據您的需求也可提供相關的加工或是素材切斷販售,請務必來信詢問看看唷!

This is the drill processing of by the water jet.

這一次介紹的是小直徑孔洞的水刀加工。

↓　↓　↓

The circumference is cut by layer, and the small diameter hole is processing by water jet.
It’s suitable for a powder scrap screen.

外周是雷射切割,內孔則為水刀加工。
適合運用在粉狀廢棄物的過濾篩等用途。

The plate on the photo is the size of 6mm thickness and 3.0mm diameter.
Without the heat influence, we also look forward this technology could decrease the cost on the products which is processed by heat drilling originally.

照片上的實例是板厚6mm, 內孔直徑為3.0mm。
因為不受熱影響的限制, 針對原本須用熱力加工的製品來說,也有降低成本的效果。

If you are interested in the High Manganese steel.
No matter the standard size material or the cutting, surface processing, drilling processing, etc. Please feel free to contact us anytime !

若是您對高錳鋼的標準尺寸販售,切斷加工,表面加工,鑽孔加工等等感興趣的話,
歡迎隨時洽詢敝司唷~!

***Contact Information　聯絡資訊***

Please E-mail us for inquiry. 歡迎來信詢問更多詳細資訊
https://www.kumagai-steel.co.jp/contact/index.html

https://www.kumagai-steel.co.jp/